MICROSOFT DISPLAY DOCK BLINKING INSTALL
MICROSOFT DISPLAY DOCK BLINKING UPDATE
MICROSOFT DISPLAY DOCK BLINKING DRIVER
MICROSOFT DISPLAY DOCK BLINKING SOFTWARE

Visit your PC manufacturer's website to see if there is a BIOS update available for your computer.Īlso check if USB 3.0 mode (if present) is enabled in your BIOSĤ. Check if you have the latest BIOS version installed on your PC If you have Windows 7 installed see this article to obtain the latest USB 3.0 host controller driverģ.

MICROSOFT DISPLAY DOCK BLINKING DRIVER

Check if you have the latest USB 3.0 host controller driver installed on your PC You can locate the latest version on our Driver DownloadsĢ.

MICROSOFT DISPLAY DOCK BLINKING SOFTWARE

Check if you have the latest DisplayLink software installed Check PCIe Active State Power Management (ASPM) settingsġ.

Check for error codes in Device Manager.

Try connecting your product through an external mains powered USB hub.

Try a USB 'Y' cable (if you are using a USB powered monitor product).

Check if the same behaviour is observed with a different USB cable or USB port.

Check if the same behaviour is seen when connected to a USB 2.0 port on your PC (or if none is available with a USB 2.0 cable).

Check if you have the latest BIOS version installed on your PC.

Check if you have the latest USB 3.0 host controller driver installed on your PC.

Check if you have the latest DisplayLink software installed.

If this does not solve the issue, follow the steps below: If it is loose, the monitor will be detected and then lost by the dock, causing display reconfiguration. Firstly check that the video cable is fully plugged into the dock and the monitor. This can be caused by loose video cables or USB instability.

Or your DisplayLink display freezes or locks up, while directly connected screens, eg the built in laptop screen, continue to work.

Your attached monitor will repeatedly flash off and on again.

You repeatedly hear the device disconnect and reconnect chime.

Please wait until the LED stops blinking before you unplug your Surface Dock from power … You will need to disconnect and reconnect the dock twice before the update fully completes.Your USB video adapter, USB docking station or USB monitor constantly disconnects and reconnects, or freezes. The LED in the Ethernet port of the dock will blink while the update is in progress. “The DisplayPort firmware update will be installed while the hardware is disconnected. “Reconnect your Surface Dock for 2 minutes and then disconnect it from your device,” Microsoft explains. And this is where things get really crazy.

If that’s not complicated enough, however, you can manually update the firmware instead. “The process can take a few minutes to complete and will continue even if interrupted.” “The Surface Dock Firmware Update will normally update the dock silently in background after you disconnect from the dock and reconnect,” Microsoft says. Then, disconnect the Surface Dock from the Surface PC and wait for 5 seconds before reconnecting.

MICROSOFT DISPLAY DOCK BLINKING INSTALL

Simple, right?Īccording to Microsoft, to correctly install this tool and the latest firmware update for Surface Dock, you need to give the background service several seconds to check for updates no prompt is provided. (From what I can tell, that’s still true, but whatever.) The first version of this new tool is called Surface_Dock_FwUpdate_1.42.139_Win10_17134_19.084.31680_0.msi. (Yes, the old tool had an “r” at the end of its name and the new one doesn’t.) The old tool was previously available only via the Surface Tools for IT download package. This new tool, called Surface Dock Firmware Update, replaces the previous Surface Dock updater, which was called Microsoft Surface Dock Updater. “Once installed, it will update any Surface Dock attached to your Surface device.” “Microsoft Surface Dock Firmware Update newly redesigned to automatically update Surface Dock firmware while running in the background on your Surface device,” the Microsoft Docs website explains. Microsoft this week released a new Microsoft Surface Dock Firmware Update tool that supersedes the previous tool.

Microsoft display dock blinking